- Подробность продукта
Preform mould specification :
|
Picture |
|
 |
|
specification |
21 grms ，28mm PET preform mould |
|
|
Cavities |
48 |
|
|
Mould frame material |
P20 hardness from Shanghai Baogang |
|
|
Core, cavity material |
2316 in Germany |
|
|
Heater ring |
Anole in germany |
|
|
Runner structure |
12points base runner+48 subchannel + gate enter runner hot runner |
|
|
Temperature controller |
Insert card type thermostat cards with SINO in Korea ,thermocouple with SINO in Korea |
|
|
Mold outline size (mm) |
/ |
|
|
Mould weight |
2.8-3.0T(just for your reference ) |
|
|
Mould structure |
Double lock regulable , valve gate no cut |
|
|
Injection machine tonnage |
388T |
|
|
Guarantee period |
1 year |
|
|
Mould life |
3 million shot injection times |
|
|
Cycle times |
20s-25s |
|
|
Delivery time |
50-55days after the drawing and sum be confirmed |
|
Remark:
Equipped spare parts :
Equipped with extra two core, two cavity, two neck screws , two heating ring, one bull rod , some seal rings and one set hot runner temperature control box .
①the eccentricity is within 0.1mm. ②the upper and lower mandrils are made according to your requirement。③The weight/gram tolerance is ±0.2g ④The mould normal life is 3 million injection times. ⑤ Guarantee time to keep mould in good free repair for one year. ⑥ the mold has no margin and bur. It has advantages of good finish and smooth shelling, no draw bench , breach and clamping preform mold . ⑦The lettering on the screw is to your demand .
